Recruiting Benchmarks 2026: Time-to-Fill and Cost-per-Hire Explained
Last fact-checked: 13 November 2026 | Fact-checked by: Jueri (Jüri) Hass
Recruiting benchmarks 2026 look contradictory at first glance. One report says the typical non-executive role takes 39 days to fill; another says 60 to 75 days. Both can be correct, because they measure different things in different samples. This guide explains what the main 2026 sources actually say, why they differ, and how to use them without comparing apples to oranges.
Key takeaways
- SHRM’s 2026 benchmarking, based on more than 4,600 organisations, puts median time-to-fill for non-executive positions at 39 calendar days. Executive time-to-fill was unchanged from the year before.
- Ashby’s 2026 data measures time to first fill instead, and reports medians of 52 days (junior), 63 (mid-level) and 71 (senior), and 60 days for business roles versus 75 for technical roles.
- Cost-per-hire diverged by seniority in 2026: SHRM reports executive cost-per-hire rose, while non-executive cost stayed relatively stable.
- The workload on recruiters is growing. At extra-large organisations, median requisitions per recruiter increased by 67%.
- Before you compare your own numbers to any benchmark, match the definition (when the clock starts and stops), the statistic (median or average) and the role mix.
Recruiting benchmarks 2026 at a glance
| Metric | 2026 value | Source | What it measures |
|---|---|---|---|
| Time to fill, non-executive (median) | 39 calendar days | SHRM | Requisition opened to offer accepted |
| Time to fill, executive | Unchanged from 2025 (reported as 45 days) | SHRM | Same definition |
| Time to first fill, junior / mid / senior (median) | 52 / 63 / 71 days | Ashby | Job opened to first hire |
| Time to first fill, business / technical (median) | 60 / 75 days | Ashby | Job opened to first hire |
| First to last interview, business / technical (median) | 14.4 / 17.9 days | Ashby | Hired candidates only |
| Cost per hire, non-executive (median) | Relatively stable; reported at about $1,300 | SHRM | Total recruiting spend per hire |
| Cost per hire, executive (median) | Increased; reported at about $15,000 | SHRM | Total recruiting spend per hire |
| Requisitions per recruiter, extra-large organisations | +67% (median) | SHRM | Recruiter workload |
| Non-executive positions filled externally (median) | 97% (93% in 2025) | SHRM | Share of hires from outside the company |
All dollar figures are US data.
Why recruiting benchmarks disagree
The 39-day and 60-to-75-day figures sit on different clocks. Three differences explain most of the gap.
1. Different start and end points. Time-to-fill generally runs from the day a requisition is opened to the day a candidate accepts. SHRM counts calendar days, including weekends and holidays. Ashby’s time to first fill runs from job opening to the first hire made, which for roles with several openings is not the same as the last. Time-to-hire, a third metric, usually starts only when the hired candidate applies, so it is almost always the smallest number.
2. Different samples. SHRM’s figures come from a survey of recruiting and HR leaders at more than 4,600 organisations across sectors and sizes. Ashby’s figures come from activity inside its own recruiting software, so they reflect the companies that use that platform. (This is our interpretation: expect Ashby’s sample to lean towards technology and fast-growing employers.)
3. Median versus average. A median is the middle value, so a few very slow executive searches do not drag it up. An average (mean) does. Reports that mix the two are the most common reason people see “conflicting” numbers for the same metric.
Time-to-fill: what 2026 shows
SHRM’s brief says time-to-fill for non-executive positions fell to a median of 39 calendar days in 2026, while executive time-to-fill stayed where it was. Secondary sources report the previous non-executive median as 44 days.
Ashby’s numbers add the detail that SHRM’s headline hides:
| Role group | Median time to first fill |
|---|---|
| Junior | 52 days |
| Mid-level | 63 days |
| Senior | 71 days |
| Business roles | 60 days |
| Technical roles | 75 days |
Senior roles take about 37% longer to fill than junior ones, and technical roles take roughly 15 days longer than business roles. Ashby also notes that a single interview benchmark applied to every role makes technical hiring look slower than it is: hired technical candidates spend a median of 17.9 days between first and last interview, against 14.4 days for business candidates.
The practical lesson is that a blended company-wide time-to-fill is a weak benchmark. A team hiring mostly senior engineers should never be compared with SHRM’s all-roles median.
Cost-per-hire: what changed in 2026
SHRM’s 2026 brief reports two things about cost: executive cost-per-hire increased, while non-executive cost stayed relatively stable. Secondary sources put the 2026 medians at roughly $1,300 for non-executive roles and $15,000 for executive roles, up from about $10,600 for executives in 2025.
You will also see much higher figures quoted, such as about $5,475 for non-executive hires and $35,879 for executive hires. These come from SHRM’s earlier, separate release and are averages, not medians. A handful of expensive hires lifts an average far above the median, which is why the two sets of numbers look so different even though both are attributed to SHRM.
Two cautions apply to any cost-per-hire benchmark:
- It is a direct cost measure. It counts recruiting spend such as agency fees, job ads and recruiter time, not the output lost while the role is empty.
- It depends heavily on your hiring mix. Volume hiring, agency-led searches and executive searches have very different cost profiles.
Recruiter workload and sourcing
Two other SHRM findings explain why speed is hard to improve. Median requisitions per recruiter at extra-large organisations rose 67% in 2026, so each recruiter carries far more open roles. And the median share of non-executive positions filled externally rose from 93% to 97%, which means almost all hiring now depends on attracting outside candidates. The candidate pool is also shifting: early-career hiring in AI-exposed jobs is under particular pressure, and our analysis of robotization argues that displaced manual workers will mostly move into adjacent occupations. SHRM also reports that more than two in three organisations struggled to fill open positions in 2026, according to its 2026 talent trends research.
How to use recruiting benchmarks without being misled
- Match the definition. Write down when your clock starts and stops before you compare it with anyone’s figure.
- Segment first. Split your data by seniority, business versus technical roles, and location before you compare.
- Use medians. Report the median alongside the average, and look at the spread, not just the centre.
- Track your own baseline. External benchmarks are context. Your own trend over four quarters is more useful than any single industry number.
- Put a price on vacancy. The cost of an open role is not in cost-per-hire. A simple estimate is the daily value a role produces multiplied by the days it stays open. Illustration with hypothetical numbers: a role that produces the equivalent of 300 euros a day, left open for 28 working days (about 39 calendar days), represents roughly 8,400 euros of lost output.
What this means for agencies and HR-tech teams
If you build or sell recruiting software, benchmark definitions are a product issue. Customers compare dashboards with published numbers, so the metric names, start and stop events, and median-versus-average choice need to be visible in the product. Showing time-to-fill by seniority and role family, and the interview-loop length separately, gives customers the comparison that actually matches the published data. Pay data is the next field to standardise: pay-range fields are becoming a legal requirement in the EU, as we explain in our guide to the EU Pay Transparency Directive. (This section is our interpretation, not a finding from the sources.)
Frequently asked questions
What is the average time to fill a position in 2026?
SHRM’s 2026 benchmarking reports a median of 39 calendar days for non-executive positions. Other sources measure different clocks and report higher figures, for example Ashby’s 52 to 71 days to first fill by seniority.
Why is Ashby’s number higher than SHRM’s?
Ashby measures from the job opening to the first hire made, and its sample comes from its own platform. SHRM measures requisition opened to offer accepted, in a broad survey of organisations.
What is the difference between time-to-fill and time-to-hire?
Time-to-fill starts when the requisition is opened. Time-to-hire starts when the hired candidate enters the process, so it is usually shorter.
How long does it take to hire a technical employee?
Ashby reports a median of 75 days to first fill for technical roles, compared with 60 days for business roles.
Is cost-per-hire going up?
According to SHRM’s 2026 brief, executive cost-per-hire increased while non-executive cost stayed relatively stable.
Which benchmark should a small company use?
The one that matches your role mix and your definition. For a mostly technical team, Ashby’s technical-role figures are a fairer comparison than SHRM’s all-roles median.
Conclusion
Recruiting benchmarks 2026 are only useful when you know what each number measures. Compare like with like, segment by seniority and role type, and track your own trend. The teams that do this stop arguing about whose number is right and start fixing the stages where the days are actually lost.
Related reading
- EU Pay Transparency Directive: What Recruiters and HR-Tech Teams Need to Change Before 2027: the pay-range and reporting rules that will change how job adverts and offers are built.
- Which Jobs Will AI Replace, and Which Will Pay More?: how AI exposure is changing demand and pay across occupations.
- Robots and Jobs: Who Can Adapt to the New Wave?: what robotization means for manual workers and which transition routes are realistic.
Job.Services publishes verified data for employers, recruiters and HR-tech teams. If this helped, share it with the person who owns your hiring metrics.
Sources
Build Your Brand on job.services
Take advantage of this high-authority domain before a competitor does.